Floating Platforms

    If you use our pontoon systems, you are able to put a wide variety of personal or business projects on the water into practice. Take advantage of our different pontoon floaters, which we use for the construction our floating platforms. The modular combinable individual floats PT05 can be used for example to very easy build a floating pontoon platform. Of course, you can also use them for the construction of a floating work platform.

    • read more

      Floating Platforms in Modular Design

      In general, when using our pontoon module systems for the construction of floating platforms, pontoon platforms can be produced quickly and easily for a wide variety of purposes. When designing your individual floating pontoon you can choose between four modular pontoon systems. Decisive for the right choice is the determination of the desired load capacity of the floating platform. For this purpose, depending on the requirements, individual pontoon floats of different sizes are used for this purpose. With these floating units, payloads up to 600 kg/m² can be generated. We gladly explain to you the various advantages and requirements of our pontoon systems by e-mail or on the phone. It's also possible to use our callback service.

      Floating Pontoon Platform for DIY

      The special feature of our modular pontoon systems is that you can carry out almost all construction and assembly work on your floating platform yourself and thus minimise costs. For example, it is possible to buy and attach all components of the pontoon deck cladding independently. Often it is only necessary to order the pure individual plastic floats from us and to carry out all remaining work yourself, because it is so easy.
      Of course, in many projects it is not enough with a normal floating platform. Therefore you also have the possibility to order a special floating platform, which will be adapted to your special requirements. Our experts will be happy to help you and support you in planning and implementing your special floating pontoon project.

      Accessories

      Of course we can offer further adaptations or equipment for all floating platforms. You can order different deck coverings (e.g. wooden or plastic planks), railings, access gangways, bathing ladders and of course anchoring components such as piles, chains or ground anchors. If the floating platform is used as a working pontoon, we can also offer you robust and non-slip surfaces in the form of sheet metal or gratings.

      From the Production to the Final Assembly

      We will not leave you alone and support you throughout the complete project process. All components for the construction of our floating platforms are being directly produced from Perebo in Germany and can easily be delivered and installed at site (if possible). If you are not sure whether and how the platforms will withstand the planned loads, we have trained engineers in our team just for this matter who will assist you when planning your project.

      With the smart solutions from PEREBO, your projects will be successful, be it for construction projects, events or leisure projects.

    Benefit from our 4 module systems

    icon-schwimmplattform-1

    payload= up to 100kg/m²

    icon-schwimmplattform-2

    payload= up to 200kg/m²

    icon-schwimmplattform-3

    payload= up to 320kg/m²

    icon-schwimmplattform-3

    payload= up to 600kg/m²

    icon-schwimmplattform-1

    Perebo-Small

    payload= up to 100kg/m²
    Ideal for private use or for the construction of lightly loaded floating platforms.
    (e.g. private used bathing pontoons, small floating work platforms, etc.)
    load-bearing elements: Pontoon floats PT05

    Assembly Animation

    floating module system-Perebo-Small-assembly animation

    System Structure described in individual images

    Individual floats PT05
    the individual floats PT05 are laid with distance

    Floats + Supporting frame
    floats PT05 with attached supporting frame (e.g. wooden- or synthetic material beams)

    Installation of the deck covering
    installation of the deck covering (e.g. wooden or synthetic material flooring)

    Finished platform + Accessories
    attaching of anchoarge components and other fittings

    • Technical Data and Explanations

      When building a floating platform by means of the module system Perebo-SMALL, the pontoons PT05 are laid at distance. On this type of assembly, the floaters are interconnected by means of a girder grid made of wood, synthetic material or metal. This girder grid can be screwed into the floats. (screw size: M10) On it can be attached the deck covering. The finished floating platform can be fixed by means of ground weights, ropes or piles.

      You can either buy from us the individual floats PT05 or pre-assembled modules.

      Technical Data:

      • load-bearing elements: pontoons PT05
      • payload: max. 100kg/m²
      • different deck coverings selectable (wooden- or synthetic material planks or aluminum plates)
      • railing partially or circumferentially mountable
      • different platform sizes executable
      • during assembly a lifting device is not required

    configure now

    Gladly we advise you also by telephone under +49 (0)3841 224049-0

    icon-schwimmplattform-2

    Perebo-Medium

    payload= up to 200kg/m²
    Suitable for private and public use or for the construction of medium-duty loaded floating platforms.
    (e.g. event-pontoons, floating lake stages, larger floating work platforms, etc.)
    load-bearing elements: Pontoon floats PT05

    Assembly Animation

    floating module system-Perebo-Medium-assembly animation

    System Structure described in individual images

    Floats PT05 +
    Connection elements
    the floats PT05 are laid side by side and coupled by steel-connection-elements (single-layer)

    Coupling of the
    floats PT05
    coupling of the individual floats PT05

    Floats + Substructure
    of the deck covering
    attaching of the deck covering substructure (e.g. wooden- or synthetic material beams)

    Installation of the
    deck covering
    installation of the deck covering (e.g. wooden or synthetic material flooring)

    Finished platform +
    Accessories
    attaching of anchoarge components and other fittings

    • Technical Data and Explanations

      When building a floating platform by means of the module system Perebo-MEDIUM, the pontoons PT05 are laid side by side until the desired area is reached. (one pontoon layer) The individual pontoons are connected by means of steel-clamps. In the next step, beams made of wood, plastic or metal can be screwed into the floats in the longitudinal or cross direction. (the construction of a girder grid is not necessary) On these beams the deck covering can be mounted. The finished floating platform can be fixed by means of ground weights, ropes or piles.

      You can either buy from us the individual floats PT05 + connection elements or pre-assembled modules.

      Technical Data:

      • load-bearing elements: pontoons PT05
      • payload: max. 200kg/m²
      • different deck coverings selectable (wooden- or synthetic material planks or aluminum plates)
      • railing partially or circumferentially mountable
      • different platform sizes executable
      • during assembly a lifting device is not required

    configure now

    Gladly we advise you also by telephone under +49 (0)3841 224049-0

    icon-schwimmplattform-3

    Perebo-Large

    payload= up to 320kg/m²
    Ideal for public use or for the construction of highly loaded floating platforms.
    (e.g. floating house platforms, big floating event or work platforms, etc.)
    load-bearing elements: Pontoon floats PT03 or PT04

    Assembly Animation

    floating module system-Perebo-Large-assembly animation

    System Structure described in individual images

    Floats +
    Supporting frameattaching of the floats PT03 or PT04 at a supporting frame made of steel

    Connection of the individual modules
    connection of the individual modules by means of screwing

    Platform + Substructure of the deck covering
    attaching of the deck covering substructure (e.g. wooden- or synthetic material beams)

    Installation of the deck covering
    installation of the deck covering (e.g. wooden or synthetic material flooring)

    Finished platform + Accessories
    attaching of anchoarge components and other fittings

    • Technical Data and Explanations

      The basis of the module system Perebo-LARGE is formed by independent-floatable modules, which are screwed together in the shallow water or on land. The individual modules consist of our plastic floats PT03 or PT04 and a steel-supporting-frame. They can be pre-assembled by Perebo. After connection of these modules, wooden- plastic- or metal beams can be screwed into the supporting-frame made of steel. On these beams the deck covering can be mounted. The finished floating platform can be fixed by means of ground weights, ropes or piles.

      You can either buy from us the individual floats PT03 / PT04 or pre-assembled modules.

      Technical Data:

      • load-bearing elements: pontoons PT03 or PT04
      • payload at the use of PT03= max. 200kg/m²
      • payload at the use of PT04=max. 320kg/m²
      • different deck coverings selectable (wooden- or synthetic material planks or aluminum plates)
      • railing partially or circumferentially mountable
      • different platform sizes executable
      • during assembly a lifting device is required

    configure now

    Gladly we advise you also by telephone under +49 (0)3841 224049-0

    icon-schwimmplattform-3

    Perebo-Extra-Large

    payload= up to 600kg/m²
    Ideal for public use or for the construction of very highly loaded floating platforms.
    (e.g. floating house platforms, big floating event or work platforms, etc.)
    load-bearing elements: Pontoon floats PT05

    Assembly Animation perebo-floating-swim-platform-xl-animation

    System Structure described in individual images

    Floats PT05 +
    Connection elementsthe floats PT05 are laid side by side and coupled by steel-connection-elements (double-layer)

    Connection of the individual modulescoupling of the individual floats PT05

    Platform + Substructure of the deck coveringattaching of the deck covering substructure (e.g. wooden- or synthetic material beams)

    Installation of the deck coveringinstallation of the deck covering (e.g. wooden or synthetic material flooring)

    Finished platform + Accessoriesattaching of anchoarge components and other fittings

    • Technical Data and Explanations

      When building a floating platform by means of the module system Perebo-EXTRA LARGE, the pontoons PT05 are laid side by side until the desired area is reached. (two pontoon layers) The individual pontoons are connected by means of steel-clamps. In the next step, beams made of wood, plastic or metal can be screwed into the floats in the longitudinal or cross direction. (the construction of a girder grid is not necessary) On these beams the deck covering can be mounted. The finished floating platform can be fixed by means of ground weights, ropes or piles.

      You can either buy from us the individual floats PT05 + connection elementgs or pre-assembled modules.

      Technical Data:

      • load-bearing elements: pontoons PT05
      • payload: max. 600kg/m²
      • different deck coverings selectable (wooden- or synthetic material planks or aluminum plates)
      • railing partially or circumferentially mountable
      • different platform sizes executable
      • during assembly a lifting device is not required

    configure now

    Gladly we advise you also by telephone under +49 (0)3841 224049-0

    Accessories for Perebo Floating Plattforms can be found here
    accessories overview

    Selected projects

    Floating platforms (anchorage permanently or temporary)

    Floating work platforms

    Floating bathing platforms

    Floating event platforms

     

    We like to advice you: +49 (0)3841 224049-0

    For a price inquiry please contact us or use our Call-Back Service